Norm

NEN-EN 50607:2014 Ontw. en

Satelietsignaal distributie over een enkele coaxiale kabel - Tweede generatie

  • Deze norm is ingetrokken sinds 10-02-2015

29,20

Over deze norm

Status Ingetrokken
Aantal pagina's 27
Commissie Geluid, beeld en multimedia-apparaten en -systemen
Gepubliceerd op 01-04-2014
Taal Engels
NEN-EN 50607 describes: ? the system physical structure; ? the system control signals, which implement a set of messages using DiSEqC physical layer but not the DiSEqC message structure; ? the definition of identified configurations; ? the management of the potential collisions in the control signals traffic. Figure 1 illustrates the physical system configuration considered in this standard. Several satellite signal demodulators can receive signals from any of the input signal banks (Bank 1, Bank 2, 79 Bank M, with M ≤ 256) of the LNB or the switch. The signals selected by the demodulators (or receivers) are transported via a single cable to these demodulators (Receiver 1, Receiver 2, Receiver N, with N ≤ 32). To achieve these single cable distributions, the Single Cable Interface (SCIF, likely embedded in a LNB or a Switch) features some specific functions and characteristics.

Details

ICS-code 33.060.40
Nederlandse titel Satelietsignaal distributie over een enkele coaxiale kabel - Tweede generatie
Engelse titel Satellite signal distribution over a single coaxial cable - Second generation
Vervangt
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen