Over deze norm
This standard applies to all types of storage and retrieval (S/R) machines, restricted to the rails on which they travel within and outside the aisles, which embody lifting means and may embody lateral handling facilities, for the storage and retrieval of unit loads and/or long goods such as bar materials and/or for order picking or similar duties. Also included is the transfer equipment used to change between aisles. Control of machines may range from manual to fully automatic. This standard does not apply to machines derived from cranes (e. g. overhead travelling cranes), industrial trucks with free ranging capability, or robots. References in this standard to racking, buildings and systems only applies where it is necessary to assess the hazards and risks at their interfaces with storage and retrieval machines. This standard deals with all significant hazards relevant to rail dependent storage and retrieval equipment, when they are used as intended under the conditions foreseen by the manufacturer (see clause 4). This standard applies to machines and equipment which are manufactured after the date of issue of this standard. Illustrations of examples of machines and transfer equipment to which this standard applies are shown in Annex A. (This items shall be taken into the list of hazards.) Safety requirements and/or measures in this standard apply to equipment used under indoor conditions. However, additional risk assessments and safety measures need to be considered for uses in severe conditions, e. g. freezer applications, high temperatures, loads the nature of which could lead to a dangerous situation (e. g. specially brittle loads, explosives), earthquake effects and also contact with foodstuff. Hazards during decommissioning are not covered. This European Standard deals with the technical requirements for electromagnetic compatibility (EMC). It does not cover operation in environments where the electromagnetic disturbances are outside the range of those specified in EN 50082-2. Noise is not considered as significant hazard for these machines. This does not mean that the manufacturer of the machine is not obliged to carry out noise reduction and indicate the noise level.