Norm

NEN-EN 675:2010 Ontw. en

Glas voor gebouwen - Bepaling van de warmtedoorgangscoëfficiënt (U-waarde) - Methode met warmtestroommeter

  • Deze norm is ingetrokken sinds 23-06-2011

23,50

Over deze norm

Status Ingetrokken
Aantal pagina's 14
Commissie Vlakglas
Gepubliceerd op 01-12-2010
Taal Engels
This European Standard specifies a measurement procedure to determine the thermal transmittance of glazing with flat and parallel surfaces. Structured surfaces, e.g. patterned glass, may be considered to be flat. This European Standard applies to multiple glazing with outer panes which are not transparent to far infrared radiation, which is the case for soda lime silicate glass products, borosilicate glass and glass ceramics. Internal elements can be far infrared transparent. The procedure specified in this European Standard determines the U value1) (thermal transmittance) in the central area of glazing. The edge effects due to the thermal bridge through the spacer of an insulating glass unit or through the window frame are not included. Furthermore energy transfer due to solar radiation is not taken into account. The procedure specified in this European Standard should generally only be considered when the calculation method detailed in EN 673 is inappropriate or unsuitable. The document for the calculation of the overall U value of windows, doors and shutters (see A.1) gives normative reference to the U value evaluated for the glazing components according to this standard. For the purposes of product comparison, a vertical position of the glazing is specified (see Clause 10). U values evaluated according to the present standard are used for product comparison as well as for other purposes, in particular for predicting: heat loss through glazing; conduction heat gains in summer; condensation on glazing surfaces; the effects of the absorbed solar radiation in determining the solar factor (see A.2). Reference should be made to A.3, A.4, A.5 or other European Standards dealing with heat loss calculations for the application of glazing U values determined by this Standard. The determination of the thermal transmittance is performed for conditions which correspond to the average situation for glazing in practice.

Details

ICS-code 81.040.20
Nederlandse titel Glas voor gebouwen - Bepaling van de warmtedoorgangscoëfficiënt (U-waarde) - Methode met warmtestroommeter
Engelse titel Glass in building - Determination of thermal transmittance (U value) - Heat flow meter method
Vervangt
Vervangen door
Normatieve verwijzingen
  • 89/106/EEG, Bouwproducten

Winkelwagen

Subtotaal:

Ga naar winkelwagen