Norm

NEN-EN 692:2004 Ontw. en

Gereedschapsmachines - Veiligheid - Mechanische persen

  • Deze norm is ingetrokken sinds 01-11-2005

46,90

Over deze norm

Status Ingetrokken
Aantal pagina's 73
Commissie Metaalbewerkingsmachines
Gepubliceerd op 01-01-2004
Taal Engels
This European Standard specifies technical safety requirements and measures to be adopted by persons undertaking the design (as defined in 3.11 of EN 292-1:1991), manufacture and supply of mechanical presses with part revolution clutch hereinafter called presses which are intended to work cold metal or material partly of cold metal. This European Standard also covers presses, whose primary intended use is to work cold metal, which are to be used in the same way to work other sheet materials (such as cardboard, plastic, rubber or leather), and metal powder. The requirements in this standard take account of intended use, as defined in 3.12 of EN 292-1:1991. This standard presumes access to the press from all directions, deals with the hazards during the various phases of the life of the machine described in clause 4, and specifies the safety measures for both the operator and other exposed persons. This European Sstandard also applies to ancillary devices which are an integral part of the press. This standard also applies to machines which are integrated into an automatic production line where the hazards and risk arising are comparable to those of machines working separately. This European Standard does not cover mechanical presses with full revolution clutch. This European Standard does not cover machines whose principal designed purpose is: a) sheet metal cutting by guillotine; b) attaching a fastener, e.g. riveting, stapling or stitching; c) bending or folding; d) straightening; e) turret punch pressing; f) extruding; g) drop forging or drop stamping; h) compaction of metal powder; i) single purpose punching machines designed exclusively for profiles, e.g. for the construction industry. This European Standard does not cover the safety requirements related to the use of PES or PPS. They will be dealt with at its next revision. This European Standard is not applicable to machines which are manufactured before the date of publication of this document by CEN.

Details

ICS-code 25.120.10
Nederlandse titel Gereedschapsmachines - Veiligheid - Mechanische persen
Engelse titel Machine tools - Safety - Mechanical presses
Vervangt
Vervangen door
Normatieve verwijzingen
  • 98/37/EG, Machines

Winkelwagen

Subtotaal:

Ga naar winkelwagen