Over deze norm
This document specifies the technical conditions for inspection and delivery of aluminium and aluminium alloy cold drawn rod/bar and tube for general engineering applications. It applies to products which are extruded and then cold drawn. This document does not apply to; forging stock, extruded precision profiles in alloys EN AW-6060 and EN AW-6063, products delivered in coils, coiled tubes cut to length. This document will supersede EN 754-1:1997. The following technical modifications have been introduced during the revision: Clause 1: Scope is clarified with respect to what is not included Clause 3: Definition of order document is included Clause 4: Ordering document shall contain information about application, especially for products to be anodized Subclauses 5.4 and 6.2.3: Provisions regarding Brinell hardness testing is included Subclauses 5.7 and 6.2.6: Requirements to stress corrosion cracking resistance is included (from former Annex A in Part 2) Subclause 6.1.1: For samples for chemical analysis reference is made to EN 14361. Subclause 220.127.116.11: For shapes and dimensions of test pieces reference is made to EN 10002-1 (and former Annex A is deleted) Clause 7: For inspection documents, reference is made to EN 10204 Annex B: Annex B Resistance to stress corrosion cracking - Electrical conductivity is added (taken from former Part 2), Besides very slight additional adjustments in the text and up date of normative references, the following technical changes have been made: clause 1: thickness increased to 400 mm; addition of clause 6 (previousky in EN 485-2); clause 7 amended; addition of claude 10; addition of bibliography.
|Nederlandse titel||Aluminium en aluminiumlegeringen - Koudgetrokken staven en buizen - Deel 1: Technische leveringsvoorwaarden|
|Engelse titel||Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery|