Norm

NEN-EN 754-2:2006 Ontw. en

Aluminium en aluminiumlegeringen - Koudgetrokken staven en buizen - Deel 2: Mechanische eigenschappen

  • Deze norm is ingetrokken sinds 01-04-2008

35,70

Over deze norm

Status Ingetrokken
Aantal pagina's 43
Gepubliceerd op 01-11-2006
Taal Engels
This document specifies the mechanical property limits resulting from tensile testing applicable to aluminium and aluminium alloy cold drawn rod/bar and tube. Technical conditions for inspection and delivery, including product and testing requirements, are specified in prEN 754-1. Temper designations are defined in EN 515 [1]. The chemical composition limits for these materials are given in EN 573-3. The following technical modifications have been introduced during the revision: General: Typical Brinell hardness values are introduced in the tables for mechanical properties for information only The following new alloys are included; EN AW-5049, EN AW-6262A and EN AW-6065 Clause 3: Requirements for the use of condition F is described Subclause 4.2: A value should be used for elongation if not otherwise agreed, with exception of certain products Annex A: Informative Annex A added explaining temper designation used in all tables Former annexes A and B is deleted (content moved to Part 1).

Details

ICS-code 77.150.10
91.080.10-20
Nederlandse titel Aluminium en aluminiumlegeringen - Koudgetrokken staven en buizen - Deel 2: Mechanische eigenschappen
Engelse titel Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties"
Vervangt
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen