Over deze norm
This document specifies the technical conditions for inspection and delivery of wrought aluminium and aluminium alloy extruded rod/bar, tube and profile for general engineering applications. This document does not apply to; forging stock, extruded precision profiles in alloys EN AW-6060 and EN AW-6063, products delivered in coils, coiled tubes cut to length. The following technical modifications have been introduced during the revision: Clause 1: Scope is clarified with respect to what is not included Clause 3: Definition of order document is included Clause 4: Ordering document shall contain information about application, especially for products to be anodized Subclauses 5.4 and 6.2.3: Provisions regarding Brinell hardness testing are included Subclauses 5.7 and 6.2.6: Requirements to stress corrosion cracking resistance are included (from former Annex A in Part 2) Subclause 6.1.1: For samples for chemical analysis reference is made to EN 14361. Subclause 22.214.171.124: For shapes and dimensions of test pieces reference is made to EN 10002-1 (and former Annex A is deleted) Clause 7: For inspection documents, reference is made to EN 10204 Annex B: Annex.
|Nederlandse titel||Aluminium en aluminiumlegeringen - Geëxtrudeerde staven, buizen en profielen - Deel 1: Technische leveringsvoorwaarden|
|Engelse titel||Aluminium and aluminium alloys - Extruded rod /bar, tube and profiles - Part 1: Technical conditions for inspection and delivery|