Norm

NEN-EN 755-2:2006 Ontw. en

Aluminium en aluminiumlegeringen - Geëxtrudeerde staven, buizen en profielen - Deel 2: Mechanische eigenschappen

  • Deze norm is ingetrokken sinds 03-04-2008

41,00

Over deze norm

Status Ingetrokken
Aantal pagina's 65
Gepubliceerd op 01-11-2006
Taal Engels
This European Standard specifies the limits of mechanical property resulting from tensile testing of limits applicable to aluminium and aluminium alloy extruded rod/bar, tube and profile. Technical conditions for inspection and delivery, including product and testing requirements, are specified in prEN 755-1. Temper designations are defined in EN 515 [1]. The chemical composition limits for these materials are given in EN 573-3 [2]. The following technical modifications have been introduced during the revision: General: Typical Brinell hardness values are introduced in the tables for mechanical properties for information only The following new alloys are included; EN AW-3102, EN AW-5049, EN AW-6008, EN AW-6110A, EN AW-6014, EN AW-6023, EN AW-6360, EN AW-6262A and EN AW-6065, EN AW-6182, EN AW-7108, EN AW-7108A, EN AW-7021 For Alloy EN AW-5005 and EN AW-5005A new temper H111 is added Subclause 4.2: A value should be used for elongation if not otherwise agreed, with exception of certain products Annex A: Informative Annex A added explaining temper designation used in all tables Former annexes A and B is deleted (content moved to Part 1).

Details

ICS-code 77.150.10
91.080.10-20
Nederlandse titel Aluminium en aluminiumlegeringen - Geëxtrudeerde staven, buizen en profielen - Deel 2: Mechanische eigenschappen
Engelse titel Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties
Vervangt
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen