Norm

NEN-EN 792-12:2000+A1:2008 en

Handgereedschap met niet-elektrische aandrijving - Veiligheidseisen - Deel 12: Kleine cirkelzagen, kleine decoupeerzagen en oscillerende zagen

  • Deze norm is ingetrokken sinds 13-12-2012

49,30

Over deze norm

Status Ingetrokken
Aantal pagina's 21
Commissie Gereedschappen
Gepubliceerd op 01-10-2008
Taal Engels
The standard EN 792 applies to hand-held non-electric power tools driven by rotary or linear motors, powered by compressed air, hydraulic fluid and intended to be used by one operator and supported by: the operator's hand or hands, a suspension, e.g. a balancer. This part, EN 792-12, applies to hand-held non-electric small circular and small oscillating and reciprocating power tools for sawing. This part lists the significant hazards caused by such power tools and specifies safety requirements valid for different aspects of safety during their foreseeable lifetime and subsequent disposal. Power tools covered by this part of the standard: circular saws, circular knives, jig saws, oscillating saws, oscillating knives (windshield knives), power hack saws, reciprocating saws. This part of the standard applies to: circular saws with saw blades with a diameter of 65 mm or less, circular saws with diamond cutting-off wheels with diameters of 65 mm or less and a maximum cutting depth of 10 mm, oscillating saws having a saw blade with a radius of 50 mm or less or a diamond cutting-off blade with a radius of 100 mm or less.

Details

ICS-code 25.140.10
25.140.99
Nederlandse titel Handgereedschap met niet-elektrische aandrijving - Veiligheidseisen - Deel 12: Kleine cirkelzagen, kleine decoupeerzagen en oscillerende zagen
Engelse titel Hand-held non-electric power tools - Safety requirements - Part 12: Small circular, small oscillating and reciprocating saws
Vervangt
Wordt vervangen door
Normatieve verwijzingen
  • 2006/42/EG, Machines

Winkelwagen

Subtotaal:

Ga naar winkelwagen