Norm

NEN-EN 792-2:2000+A1:2008 en

Handgereedschap met niet-elektrische aandrijving - Veiligheidseisen - Deel 2: Knip- en krimpgereedschap

  • Deze norm is ingetrokken sinds 15-12-2011

49,30

Over deze norm

Status Ingetrokken
Aantal pagina's 22
Commissie Gereedschappen
Gepubliceerd op 01-09-2008
Taal Engels
The standard EN 792 applies to hand-held non-electric power tools driven by rotary or linear motors, powered by compressed air, hydraulic fluid and intended to be used by one operator and supported by: - the operator's hand or hands, - a harness, - a suspension, e.g. a balancer. This part, EN 792-2, applies to non-electric, hand-held power tools without rotation, for cutting-off wires, cables, etc., and for crimping for example connectors to cable ends. This part lists the significant hazards caused by such power tools and specifies safety requirements valid for different aspects of safety during their foreseeable lifetime. Power tools covered by this part of the standard: - crimping tools without a yoke, - cutters, - cutting-off tools, - cutting pliers.

Details

ICS-code 25.140.10
25.140.99
Nederlandse titel Handgereedschap met niet-elektrische aandrijving - Veiligheidseisen - Deel 2: Knip- en krimpgereedschap
Engelse titel Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools
Vervangt
Wordt vervangen door
Normatieve verwijzingen
  • 2006/42/EG, Machines

Winkelwagen

Subtotaal:

Ga naar winkelwagen