NEN-EN 792-7:1995 Ontw. en

Handgereedschap met niet-elektrische aandrijving - Veiligheidseisen - Deel 7: Slijpmachines

  • Deze norm is ingetrokken sinds 29-01-2002


Over deze norm

Status Ingetrokken
Aantal pagina's 43
Commissie Gereedschappen
Gepubliceerd op 01-08-1995
Taal Engels
The standard EN 792 applies to non-electric, hand-held power tools intended to be used in operation by one person using one or both hands, where the weight of the power tool is supported by the operator or by a harness or suspended e.g. by a balancer. The power tools are driven by rotary or linear motors powered by compressed air, hydraulic fluid, gaseous or liquid fuel or stored energy (e.g. by a spring). Electrically driven tools are not included. It lists the significant hazards caused by hand-held power tools. This part, EN 792-7, applies to hand-held non-electric power tools intended for grinding and cutting off, with abrasive products for use on all kund of materials. It specifies relevant safety requirements. It lists significant hazards caused by such power tools and specifies safety requirements for the tools valid for different aspects of safety during their foreseeable lifetime. This part covers power tools used with: - abrasive products with an operational speed less than or equal to 80 m/s, - abrasive products with outside dimensions as given in annex D.


ICS-code 25.140.10
Nederlandse titel Handgereedschap met niet-elektrische aandrijving - Veiligheidseisen - Deel 7: Slijpmachines
Engelse titel Handheld non-electric power tools - Safety requirements - Part 7: Grinders
Vervangen door
Normatieve verwijzingen
  • 98/37/EG, Machines



Ga naar winkelwagen