Norm

NEN-EN 820-5:2009 en

Technische keramiek - Beproevingsmethoden voor keramische monolieten - Thermomechanische eigenschappen - Deel 5: Bepaling van elasticiteitsmodulus van de temperatuurproef

61,30

Over deze norm

Status Definitief
Aantal pagina's 25
Commissie Technische keramiek
Gepubliceerd op 01-07-2009
Taal Engels
This part of EN 820 describes methods for determining the elastic moduli, specifically Young's modulus, shear modulus and Poisson's ratio, of advanced monolithic technical ceramics at temperatures above room temperature. The standard prescribes three alternative methods for determining some or all of these three parameters:A - the determination of Young's modulus by static flexure of a thin beam in three- or four-point bending.B - the determination of Young's modulus by forced longitudinal resonance, or Young's modulus, shear modulus and Poisson's ratio by forced flexural and torsional resonance, of a thin beam.C - the determination of Young's modulus from the fundamental natural frequency of a struck bar (impulse excitation method).This part of EN 820 extends the above-defined room-temperature methods described in EN 843-2 to elevated temperatures. All the test methods assume the use of homogeneous test pieces of linear elastic materials. The test assumes that the test piece has isotropic elastic properties. At high porosity levels all of the methods can become inappropriate. The maximum grain size (see EN 623-3), excluding deliberately added whiskers, should be less than 10 % of the minimum dimension of the test piece.. Although the method is feasible to apply, it is specialised, and outside the capabilities of most laboratories. There are also severe restrictions on test piece geometries and methods of achieving pulse transmission. For these reasons this method has not been included in this part of EN 820.

Details

ICS-code 81.060.30
Nederlandse titel Technische keramiek - Beproevingsmethoden voor keramische monolieten - Thermomechanische eigenschappen - Deel 5: Bepaling van elasticiteitsmodulus van de temperatuurproef
Engelse titel Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen