NEN-EN 847-3:2002 Ontw. en

Gereedschap voor houtbewerking - Spangereedschappen - Deel 3: Veiligheidseisen

  • Deze norm is ingetrokken sinds 01-08-2004

23,85 28,86 Incl BTW

Over deze norm

Status Ingetrokken
Aantal pagina's 12
Commissie Houtbewerkingsmachines
Gepubliceerd op 01-01-2002
Taal Engels
This standard applies to hazards from the design and application of clamping devices for the fastening of milling tools and circulair saw blades an woodworking machines and specifies the methods for the elimination or reduction of the hazards by the design of the clamping device and by the provision of information. This standard does not apply to arbors for spindle moulding machines in accordance with EN 848-1 as well as clamping flanges for circular sawing blades to be used on circular sawing machines in accordance with the standard series EN 1870 and does not cover hazard related to the connection of the clamping device with the machine. Bore mounted tools which are mounted or clamped on an adapter, an arbor or a mandrel shall be considered as a shank mounted tool.


ICS-code 79.120.10
Nederlandse titel Gereedschap voor houtbewerking - Spangereedschappen - Deel 3: Veiligheidseisen
Engelse titel Tools for woodworking - Clamping devices - Part 3: Safety requirements
Vervangen door



Ga naar winkelwagen