Norm

NEN-EN 860:1992 Ontw. en

Veiligheid van houtbewerkingsmachines - Vandiktebanken voor éénzijdige bewerking

  • Deze norm is ingetrokken sinds 01-06-1997
  • Deze norm is niet direct leverbaar vanuit de NEN-shop.
    Wilt u dit product bestellen neemt u dan contact op met NEN-klantenservice: (015) 2 690 391 of klantenservice@nen.nl

Over deze norm

Status Ingetrokken
Aantal pagina's 38
Commissie Houtbewerkingsmachines
Gepubliceerd op 01-11-1992
Taal Engels
This standard sets out the requirements and describes the methods for the elimination of hazards or the measures that shall be taken to minimise those hazards which cannot be eliminated on thickness planing machines as recorded under reference 12.212 in ISO standard 7984. This standard applies to machines designed to cut wood or those similar materials defined in EN 691. It supplements the standards EN 292 and EN 691. This standard deals essentially with mechanical safety requirements and the emission of noise and dust from the machine. The general requirements for electrical safety are dealt with in EN 60204. The hazards covered by this standard are listed in item 4. This standard applies to thickness planing machines with manual loading and unloading and with cutterblock fixed in position. This standard applies to stationary, transportable and semi-stationary machines, as defined in EN 691. It does not apply to hand held thickness planing machines nor to combined machines. It does not apply to thickness planing machines where the cutterblock is adjustable for depth of cut setting.

Details

ICS-code 79.120.10
Nederlandse titel Veiligheid van houtbewerkingsmachines - Vandiktebanken voor éénzijdige bewerking
Engelse titel Safety of woodworking machines - One side thickness planing machines
Vervangen door
Normatieve verwijzingen
  • 98/37/EG, Machines

Winkelwagen

Subtotaal:

Ga naar winkelwagen