Norm

NEN-EN 860:2007+A2:2012 en

Veiligheid van houtbewerkingsmachines - Vandiktebanken voor eenzijdige bewerking

74,30

Over deze norm

Status Definitief
Aantal pagina's 46
Commissie Houtbewerkingsmachines
Gepubliceerd op 01-07-2012
Taal Engels
This document specifies all significant hazards, hazardous situations and events as listed in Clause 4, relevant to stationary and displaceable one side thickness planing machines fitted with an integrated feed and with cutterblock fixed in position and manual loading and unloading of the work-piece, hereinafter referred to as "machines", designed to cut solid wood, chipboard, fibreboard and plywood when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Machines which are designed to work wood based materials may also be used for working hardened plastic materials with similar physical characteristics as wood. This document does not apply to: a) machines set up on a bench or a table similar to a bench, which is intended to carry out work in a stationary position, capable of being lifted by one person by hand; b) hand held planers or any adaptation permitting their use in a different mode, i.e. bench mounting; c) thickness planing machines where the cutterblock is adjustable for depth of cut setting. This document is not applicable to one side thickness planning machines fitted with an integrated feed and with cutterblock fixed in position which are manufactured before the date of its publication as EN.

Details

ICS-code 79.120.10
Nederlandse titel Veiligheid van houtbewerkingsmachines - Vandiktebanken voor eenzijdige bewerking
Engelse titel Safety of woodworking machines - One side thickness planing machines
Vervangt
Normatieve verwijzingen
  • 2006/42/EG, Machines

Winkelwagen

Subtotaal:

Ga naar winkelwagen