Norm

NEN-EN-IEC 60118-4:2007 en;fr

Elektro-akoestiek - Hoortoestellen - Deel 4: Ringleidingen voor de overdracht van audiofrequenties voor hoortoesteldoeleinden - Magnetische veldsterkte

  • Deze norm is ingetrokken sinds 13-03-2015

208,31

Over deze norm

Status Ingetrokken
Aantal pagina's 81
Commissie Elektro-akoestiek en ultrageluid
Gepubliceerd op 01-01-2007
Taal Engels, Frans
This international standard is applicable to audio-frequency induction loop systems producing an alternating magnetic field at audio frequencies and intended to provide an input signal for hearing aids operating with an induction pick-up coil. The standard specifies requirements for the field strength in audio-frequency induction loops for hearing aid purposes, which will give adequate signal-to-noise ratio without overloading the hearing aid. The standard also specifies the minimum frequency response requirements for acceptable intelligibility. Methods for measuring the magnetic field strength are specified, and information is given on appropriate measuring equipment (see Annex B), information that should be provided to the operator and users of the system (see Annex C), and other important considerations. The standard does not specify requirements for loop driver amplifiers or associated microphone or audio signal sources, or for the field strength produced by equipment, such as telephone handsets, within the scope of ITU-T P.370.

Details

ICS-code 17.140.50
Nederlandse titel Elektro-akoestiek - Hoortoestellen - Deel 4: Ringleidingen voor de overdracht van audiofrequenties voor hoortoesteldoeleinden - Magnetische veldsterkte
Engelse titel Electroacoustics - Hearing aids - Part 4: Induction loop systems for hearing aid purposes - Magnetic field strength
Vervangt
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen