Norm

NEN-EN-IEC 60191-1:2007 en

Mechanische normalisatie van halfgeleiders - Deel 1: Algemene regels voor de wijze van tekenen van omhulsels van discrete halfgeleiders

190,20

Over deze norm

Status Definitief
Aantal pagina's 39
Commissie Halfgeleiders
Gepubliceerd op 01-08-2007
Taal Engels
This part of IEC 60191 gives guidelines on the preparation of outline drawings of discrete devices. The primary object of these drawings is to indicate the space which should be allowed for devices in an equipment, together with other dimensional characteristics required to ensure mechanical interchangeability. It should be noted that complete interchangeability involves other considerations such as the electrical and thermal characteristics of the semiconductor devices concerned. The international standardization represented by these drawings therefore encourages the manufacturers of devices to comply with the tolerances shown on the drawings in order to extend their range of customers internationally. It also gives equipment designers an assurance of mechanical interchangeability between the devices obtained from suppliers in different countries, provided they allow the space in their equipment that is indicated by the drawings and take note of the more precise information on bases, studs, etc.

Details

ICS-code 01.080.40
31.080.01
Nederlandse titel Mechanische normalisatie van halfgeleiders - Deel 1: Algemene regels voor de wijze van tekenen van omhulsels van discrete halfgeleiders
Engelse titel Mechanical standardization of semiconductor devices - Part 1: General rules for the preparation of outline drawings of discrete devices
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen