Norm

NEN-EN-IEC 60204-11:2019 en

Veiligheid van machines - Elektrische uitrusting van machines - Deel 11: Eisen voor hoogspanningsapparatuur voor spanningen hoger dan 1000 V wisselspanning of 1500 V gelijkspanning maar niet hoger dan 36 kV

281,15 306,45 Incl BTW

Over deze norm

Status Definitief
Aantal pagina's 120
Commissie Elektrische uitrusting van machines
Gepubliceerd op 01-02-2019
Taal Engels
NEN-EN-IEC 60204-11 applies to electrical and electronic equipment and systems to machines, including a group of machines working together in a co-ordinated manner, which operate at nominal voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kV AC or DC with nominal frequencies not exceeding 60 Hz. In this document, the term HV equipment also covers the LV equipment forming an integral part of the equipment operating at high voltage. The requirements in this document primarily cover the parts operating at high-voltage except where explicitly stated otherwise. The electrical equipment covered by this document commences at the point of connection of the supply to the electrical equipment of the machine (see 5.1). This document is a generic safety standard. It does not cover all the requirements (e.g. guarding, interlocking or control) which are needed or required by other standards or regulations in order to safeguard personnel from hazards other than electrical hazards. Each type of machine has unique requirements to be accommodated to provide adequate safety. This part of IEC 60204 specifically includes, but is not limited to, machines as defined in 3.29 (Annex A lists examples of machines whose electrical equipment can be covered by this document). For protection against electric shock from high-voltage equipment, this document refers to IEC 61936-1. When it comes to low-voltage equipment, this document refers to IEC 602041: 2016. Additional and special requirements can apply to the electrical equipment of machines that - are used in the open air (i.e. outside buildings or other protective structures); - use, process or produce potentially explosive material (e.g. paint or sawdust); - are used in potentially explosive and/or flammable atmospheres; - have special risks when producing or using certain materials; - are used in mines. Hazards as a result of noise and vibration are excluded from the scope of this document.

Details

ICS-code 13.110
29.020
Nederlandse titel Veiligheid van machines - Elektrische uitrusting van machines - Deel 11: Eisen voor hoogspanningsapparatuur voor spanningen hoger dan 1000 V wisselspanning of 1500 V gelijkspanning maar niet hoger dan 36 kV
Engelse titel Safety of machinery - Electrical equipment of machines - Part 11: Requirements for equipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kV
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen