NEN-EN-IEC 60567:2012 en

Met olie gevulde elektrische uitrusting - Bemonstering van gassen voor de analyse van vrije en opgeloste gassen - Leidraad


Over deze norm

Status Definitief
Aantal pagina's 62
Commissie Vloeistoffen voor elektrotechnische doeleinden
Gepubliceerd op 01-01-2012
Taal Engels
This International Standard deals with the techniques for sampling free gases from gascollecting relays from power transformers. Three methods of sampling free gases are described. The techniques for sampling oil from oil-filled equipment such as power and instrument transformers, reactors, bushings, oil-filled cables and oil-filled tank-type capacitors are no longer covered by this standard, but are instead described in 4.2 of IEC 60475:2011. Before analysing the gases dissolved in oil, they are first extracted from the oil. Three basic methods are described, one using extraction by vacuum (Toepler and partial degassing), another by displacement of the dissolved gases by bubbling the carrier gas through the oil sample (stripping) and the last one by partition of gases between the oil sample and a small volume of the carrier gas (headspace). The gases are analysed quantitatively after extraction by gas chromatography; a method of analysis is described. Free gases from gas-collecting relays are analysed without preliminary treatment. The preferred method for assuring the performance of the gas extraction and analysis equipment, considered together as a single system, is to degas samples of oil prepared in the laboratory and containing known concentrations of gases (“gas-in-oil standards”) and quantitatively analyse the gases extracted. Two methods of preparing gas-in-oil standards are described. For daily calibration checks of the chromatograph, it is convenient to use a standard gas mixture containing a suitable known amount of each of the gas components to be in a similar ratio to the common ratios of the gases extracted from transformer oils. The techniques described take account, on the one hand, of the problems peculiar to analyses associated with acceptance testing in the factory, where gas contents of oil are generally very low and, on the other hand, of the problems imposed by monitoring equipment in the field, where transport of samples may be by un-pressurized air freight and where considerable differences in ambient temperature may exist between the plant and the examining laboratory.


ICS-code 29.040
Nederlandse titel Met olie gevulde elektrische uitrusting - Bemonstering van gassen voor de analyse van vrije en opgeloste gassen - Leidraad
Engelse titel Oil-filled electrical equipment - Sampling of gases and analysis of free and dissolved gases - Guidance



Ga naar winkelwagen