Norm

NEN-EN-IEC 60728-3:2006 en

Kabelnetwerken voor televisiesignalen, geluidsignalen en interactieve diensten - Deel 3: Actieve breedband apparatuur voor coaxiale distributienetten

  • Deze norm is ingetrokken sinds 21-03-2011

226,42

Over deze norm

Status Ingetrokken
Aantal pagina's 59
Commissie Geluid, beeld en multimedia-apparaten en -systemen
Gepubliceerd op 01-06-2006
Taal Engels
This part of IEC 60728 lays down the measuring methods, performance requirements and data publication requirements for active coaxial wideband distribution equipment of cable networks for television and sound signals. This standard applies to all broadband amplifiers used in cable networks and covers the frequency range 5 MHz to 3 000 MHz. It also applies to one-way and two-way equipment. NOTE The upper limit of 3 000 MHz is an example, but not a strict value. The frequency range, or ranges, over which the equipment is specified, should be published. All requirements and published data are understood as guaranteed values within the specified frequency range and in well-matched conditions. This standard applies to all broadband amplifiers used in cable networks; covers the frequency range 5 MHz to 3 000 MHz; applies to one-way and two-way equipment; lays down the basic methods of measurement of the operational characteristics of the active equipment in order to assess the performance of this equipment; identifies the performance specifications that shall be published by the manufacturers; states the minimum performance requirements of certain parameters. Amplifiers are divided into the following two quality levels: Grade 1: amplifiers typically intended to be cascaded. Grade 2: amplifiers for use typically within an apartment block, or within a single residence, to feed a few outlets. Practical experience has shown these types meet most of the technical requirements necessary for supplying a minimum signal quality to the subscribers. This classification shall not be considered as a requirement but as the information for users and manufacturers on the minimum quality criteria of the material required to install networks of different sizes. The system operator has to select appropriate material to meet the minimum signal quality at the subscriber's outlet, and to optimise cost/performance, taking into account the size of the network and local circumstances. All requirements and published data are understood as guaranteed values within the specified frequency range and in well-matched conditions.

Details

ICS-code 33.060.40
Nederlandse titel Kabelnetwerken voor televisiesignalen, geluidsignalen en interactieve diensten - Deel 3: Actieve breedband apparatuur voor coaxiale distributienetten
Engelse titel Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for coaxial cable networks
Vervangt
Vervangen door
Normatieve verwijzingen
  • 73/23/EEG, Laagspanningsrichtlijn

Winkelwagen

Subtotaal:

Ga naar winkelwagen