Norm

NEN-EN-IEC 60754-1:2014 en

Proeven op gassen die vrijkomen bij verbranding van materiaal uit elektrische leidingen - Deel 1: Bepaling van het gehalte aan halogeenzuur gas

117,74

Over deze norm

Status Definitief
Aantal pagina's 24
Commissie Draad en kabel voor elektrische sterkstroominstallaties
Gepubliceerd op 01-04-2014
Taal Engels
NEN-EN-IEC 60754-1 specifies the apparatus and procedure for the determination of the potential corrosivity of gases evolved during the combustion of materials taken from electric or optical fibre cable constructions by measuring the acidity (pH) and conductivity of an aqueous solution resulting from the gases evolved during the combustion. The general method specified in this standard is intended for the testing of individual components used in a cable construction. Formulae are given for the calculation of a weighted value for a combination of materials found in a specified cable. The use of this method will enable the verification of relevant requirements for either individual components or combined components of a cable construction stated in the appropriate cable specification. A simplified method is included for the testing of individual components where it is required only to demonstrate compliance with a stated performance requirement for quality control purposes.

Details

ICS-code 13.220.40
29.020
29.060.20
Nederlandse titel Proeven op gassen die vrijkomen bij verbranding van materiaal uit elektrische leidingen - Deel 1: Bepaling van het gehalte aan halogeenzuur gas
Engelse titel Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content
Vervangt
Normatieve verwijzingen
  • 2006/95/EG, Laagspanningsrichtlijn nieuw

Winkelwagen

Subtotaal:

Ga naar winkelwagen