Norm

NEN-EN-IEC 60793-1-32:2018 en

Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability

36,23 43,84 Incl BTW

Over deze norm

Status Definitief
Aantal pagina's 21
Commissie Fibre optic communications
Gepubliceerd op 01-03-2019
Taal Engels
NEN-EN-IEC 60793-1-32 is intended primarily for testing either fibres as produced by a fibre manufacturer or subsequently overcoated (tight buffered) using various polymers. The test can be performed either on fibres as produced, or after exposure to various environments. This test applies to A1, A2, A3, B and C fibres with a nominal glass dimension of 125 μm. The object of this document is to establish uniform requirements for the mechanical characteristic - coating strippability. This test quantifies the force required to mechanically remove the protective coating from optical fibres along their longitudinal axis. This test is not intended as a means to maximize fibre strength after the coating is removed nor is it intended to specify the best conditions for field stripping of optical fibres. This test is designed for optical fibres having polymeric coatings with nominal outer diameters in the range of 200 μm to 900 μm.

Details

ICS-code 33.180.10
Engelse titel Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen