Norm

NEN-EN-IEC 60793-1-41:2010 en

Optical fibres - Part 1-41: Measurement methods and test procedures - Bandwidth

153,97

Over deze norm

Status Definitief
Aantal pagina's 32
Commissie Fibre optic communications
Gepubliceerd op 01-11-2010
Taal Engels
This part of IEC 60793 describes three methods for determining and measuring the modal bandwidth of multimode optical fibres (see IEC 60793-2-10, IEC 60793-30 series and IEC 60793-40 series). The baseband frequency response is directly measured in the frequency domain by determining the fibre response to a sinusoidaly modulated light source. The baseband response can also be measured by observing the broadening of a narrow pulse of light. The calculated response is determined using differential mode delay (DMD) data. The three methods are: • Method A - Time domain (pulse distortion) measurement • Method B - Frequency-domain measurement • Method C - Overfilled launch modal bandwidth calculated from differential mode delay (OMBc) Methods A and B can be performed using one of two launches: an overfilled launch (OFL) condition or a restricted mode launch (RML) condition. Method C is only defined for A1a.2 (and A1a.3 in preparation) multimode fibre and uses a weighted summation of DMD launch responses with the weights corresponding to an overfilled launch condition. The relevant test method and launch condition should be chosen according to the type of fibre.

Details

ICS-code 33.180.10
Nederlandse titel Optical fibres - Part 1-41: Measurement methods and test procedures - Bandwidth
Engelse titel Optical fibres - Part 1-41: Measurement methods and test procedures - Bandwidth
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen