Norm

NEN-EN-IEC 61000-4-15:2011 en

Elektromagnetische compatibiliteit (EMC) - Deel 4-15: Beproevingen en meettechnieken - Flikkeringmeter - Functionele en ontwerpspecificaties

208,31

Over deze norm

Status Definitief
Aantal pagina's 40
Gepubliceerd op 01-06-2011
Taal Engels
This part of IEC 61000 gives a functional and design specification for flicker measuring apparatus intended to indicate the correct flicker perception level for all practical voltage fluctuation waveforms. Information is presented to enable such an instrument to be constructed. A method is given for the evaluation of flicker severity on the basis of the output of flickermeters complying with this standard. The flickermeter specifications in this part of IEC 61000 relate only to measurements of 120 V and 230 V, 50 Hz and 60 Hz inputs. Characteristics of some incandescent lamps for other voltages are sufficiently similar to the values in Table 1 and Table 2, that the use of a correction factor can be applied for those other voltages. Some of these correction factors are provided in the Annex B. Detailed specifications for voltages and frequencies other than those given above, remain under consideration. The object of this part of IEC 61000 is to provide basic information for the design and the instrumentation of an analogue or digital flicker measuring apparatus. It does not give tolerance limit values of flicker severity.

Details

ICS-code 33.100.20
Nederlandse titel Elektromagnetische compatibiliteit (EMC) - Deel 4-15: Beproevingen en meettechnieken - Flikkeringmeter - Functionele en ontwerpspecificaties
Engelse titel Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen