Norm

NEN-EN-IEC 61083-2:2013 en

Instrumenten en programmatuur voor metingen bij hoogspanningsimpulsproeven - Deel 2: Eisen voor software voor beproevingen met stootspanningen en stroming

172,08

Over deze norm

Status Definitief
Aantal pagina's 70
Gepubliceerd op 01-06-2013
Taal Engels
This part of IEC 61083 is applicable to software used for evaluation of impulse parameters from recorded impulse voltages and currents. It provides test waveforms and reference values for the software required to meet the measuring uncertainties and procedures specified in IEC 60060-1, IEC 60060-2, IEC 60060-3 and IEC 62475. Hardware with built-in firmware that cannot accept external numerical input data is not covered by this standard. The object of this standard is to - establish the tests which are necessary to show that the performance of the software complies with the requirements of the relevant IEC standards; - define the terms specifically related to digital processing; - specify reference values and the acceptance limits for the reference impulses; - specify the requirements for the record of performance; - define the methods to assess the contribution of software to the measurement uncertainty.

Details

ICS-code 17.220.20
19.080
Nederlandse titel Instrumenten en programmatuur voor metingen bij hoogspanningsimpulsproeven - Deel 2: Eisen voor software voor beproevingen met stootspanningen en stroming
Engelse titel Instruments and software used for measurement in high-voltage and high-current tests - Part 2: Requirements for software for tests with impulse voltages and currents
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen