Norm

NEN-EN-IEC 61290-1-3:2006 en;fr

Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method

  • Deze norm is ingetrokken sinds 07-07-2015

90,57

Over deze norm

Status Ingetrokken
Aantal pagina's 37
Commissie Fibre optic communications
Gepubliceerd op 01-05-2006
Taal Engels, Frans
This International Standard applies to all commercially available optical amplifiers (OA) and optically amplified subsystems. It applies to OA using optically pumped fibres (OFA based on either rare-earth doped fibres or on the Raman effect), semiconductors (SOA), and waveguides (POWA). The object of this standard is to establish uniform requirements for accurate and reliable measurements, by means of the optical power meter test method, of the following OA parameters, as defined in Clause 3 of IEC 61291-1: a) nominal output signal power; b) gain; c) reverse gain; d) maximum gain; e) polarization-dependent gain; f) large-signal output stability; g) saturation output power; h) maximum input signal power; i) maximum output signal power; j) input power range; k) output power range; l) maximum total output power. In addition this test method provides a means for measuring the following parameters: - maximum gain wavelength; - gain wavelength band. The object of this standard is specifically directed to single-channel amplifiers. For multichannel amplifiers, one should refer to the IEC 61290-10 series.

Details

ICS-code 33.180.30
Nederlandse titel Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
Engelse titel Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
Vervangt
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen