Norm

NEN-EN-IEC 61472:2004 en;fr

Werken onder spanning - Minimale naderingsafstand voor met wisselspanning gevoede systemen tussen 72,5 en 800 kv - Berekeningswijze

  • Deze norm is ingetrokken sinds 22-07-2013

191,11

Over deze norm

Status Ingetrokken
Aantal pagina's 85
Commissie Werkvoorschriften
Gepubliceerd op 02-12-2004
Taal Engels, Frans
Describes a method for calculating the minimum approach distances for live working, at maximum voltages between 72,5 kV and 800 kV. This standard addresses system overvoltages, and the working air distances between parts and/or workers at different potentials. The required withstand voltage and minimum approach distances calculated by the method described in this standard are evaluated taking into consideration the following: - workers are trained for, and skilled in, working in the live working zone;- the anticipated overvoltages do not exceed the value selected for the determination of the required minimum approach distance;- transient overvoltages are the determining overvoltages;- tool insulation has no continuous film of moisture present on the surface;- no lightning is seen or heard within 10 km of the work site;- allowance is made for the effect of conducting components of tools;- the effect of altitude on the electric strength is taken into consideration.

Details

ICS-code 13.260
29.240.20
29.260.99
Nederlandse titel Werken onder spanning - Minimale naderingsafstand voor met wisselspanning gevoede systemen tussen 72,5 en 800 kv - Berekeningswijze
Engelse titel Live working - Minimum approach distances for a.c. systems in the volt age range 72,5 kV to 800 kV - A method of calculation
Vervangen door
Gewijzigd door

Winkelwagen

Subtotaal:

Ga naar winkelwagen