Norm

NEN-EN-IEC 61508-3:2010 en

Functionele veiligheid van elektrische/elektronische/programmeerbare elektronische systemen verbandhoudend met veiligheid - Deel 3: Eisen voor programmatuur

280,76

Over deze norm

Status Definitief
Aantal pagina's 114
Commissie Industrieel meten, regelen en automatiseren
Gepubliceerd op 01-06-2010
Taal Engels
This part of the IEC 61508 series a) is intended to be used only after a thorough understanding of IEC 61508-1, which provides the overall framework for the achievement of functional safety; b) applies to any safety-related system, as defined by IEC 61508-1, that contains at least one electrical, electronic or programmable electronic element; c) applies to all elements within an E/E/PE safety-related system (including sensors, actuators and the operator interface); d) specifies how to refine the E/E/PE system safety requirements specification, developed in accordance with IEC 61508-1 (comprising the E/E/PE system safety functions requirements specification and the E/E/PE system safety integrity requirements specification), into the E/E/PE system design requirements specification; e) specifies the requirements for activities that are to be applied during the design and manufacture of the E/E/PE safety-related systems (i.e. establishes the E/E/PE system safety lifecycle model) except software, which is dealt with in IEC 61508-3 (see Figures 2 to 4). These requirements include the application of techniques and measures that are graded against the safety integrity level, for the avoidance of, and control of, faults and failures; f) specifies the information necessary for carrying out the installation, commissioning and final safety validation of the E/E/PE safety-related systems; g) does not apply to the operation and maintenance phase of the E/E/PE safety-related systems - this is dealt with in IEC 61508-1 - however, IEC 61508-2 does provide requirements for the preparation of information and procedures needed by the user for the operation and maintenance of the E/E/PE safety-related systems; h) specifies requirements to be met by the organisation carrying out any modification of the E/E/PE safety-related systems

Details

ICS-code 25.040.40
Nederlandse titel Functionele veiligheid van elektrische/elektronische/programmeerbare elektronische systemen verbandhoudend met veiligheid - Deel 3: Eisen voor programmatuur
Engelse titel Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen