Norm

NEN-EN-ISO 10042:2004 Ontw. en

Lassen - Booglasverbindingen in aluminium en aluminiumlegeringen - Kwaliteitsniveaus voor onvolkomenheden

  • Deze norm is ingetrokken sinds 30-11-2005

31,83

Over deze norm

Status Ingetrokken
Aantal pagina's 25
Commissie Lassen en verwante processen
Gepubliceerd op 01-04-2004
Taal Engels
This International Standard provides quality levels of imperfections in arc-welded joints in aluminium and its alloys. It applies to material thickness above 0,5 mm. Quality levels for beam welded joints are presented in ISO 13919-2. Three quality levels are given in order to permit application for a wide range of welded fabrication. They are designated by symbols B, C and D. Quality level B corresponds to the highest requirement on the finished weld. The quality levels refer to production quality and not to the fitness-for-purpose (see 3.2) of the product manufactured. This International Standard applies to: - all types of welds, e. g. butt welds, fillet welds and branch connections; - the following welding processes and their defined sub-processes in accordance with ISO 4063: - 131 metal inert gas welding (MIG welding); gas metal arc welding /USA/; - 141 tungsten inert gas welding (TIG welding); gas tungsten arc welding /USA/; - 15 plasma arc welding; - manual, mechanised and automatic welding; - all welding positions. Metallurgical aspects, e.g. grain size, hardness, are not covered by this International Standard. For the purposes of this International Standard the term aluminium covers aluminium and its alloys.

Details

ICS-code 25.160.40
Nederlandse titel Lassen - Booglasverbindingen in aluminium en aluminiumlegeringen - Kwaliteitsniveaus voor onvolkomenheden
Engelse titel Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections
Vervangt
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen