Norm

NEN-EN-ISO 10042:2018 en

Lassen - Booglasverbindingen in aluminium en aluminiumlegeringen - Kwaliteitsniveaus voor onvolkomenheden

80,61 97,54 Incl BTW

Over deze norm

Status Definitief
Aantal pagina's 18
Commissie Lassen en verwante processen
Gepubliceerd op 01-07-2018
Taal Engels
NEN-EN-ISO 10042 specifies quality levels for imperfections in arc-welded joints in aluminium and its alloys. It applies to material thicknesses above 0,5 mm. Three quality levels are given in order to permit application to a wide range of welded constructions. They are designated by symbols B, C and D. Quality level B corresponds to the highest requirement on the finished weld. The quality levels refer to production quality and not to the fitness for purpose (see 3.2) of the product manufactured. This document is applicable to all types of welds (e.g. butt welds, fillet welds and branch connections), to manual, mechanized and automated welding, and to all welding positions. It is applicable to the following welding processes: - metal inert gas welding (MIG welding); gas metal arc welding /USA; - tungsten inert gas welding (TIG welding); gas tungsten arc welding /USA; - plasma arc welding. It is not applicable to metallurgical aspects (e.g. grain size, hardness).

Details

ICS-code 25.160.40
Nederlandse titel Lassen - Booglasverbindingen in aluminium en aluminiumlegeringen - Kwaliteitsniveaus voor onvolkomenheden
Engelse titel Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen