Norm

NEN-EN-ISO 10370:2012 Ontw. en

Aardolieproducten - Bepaling van het koolstofresidu - Micromethode

  • Deze norm is ingetrokken sinds 28-11-2014

25,62

Over deze norm

Status Ingetrokken
Aantal pagina's 13
Commissie Vloeibare en gasvormige brandstoffen, smeermiddelen en verwante producten
Gepubliceerd op 01-10-2012
Taal Engels
This International Standard specifies a method for the determination of the amount of carbon residue, in the range 0,10 % (m/m) to 30,0 % (m/m), left after evaporation and pyrolysis of petroleum products under specified conditions. For products which yield a residue in excess of 0,10 % (m/m), the test results are equivalent to those obtained by the Conradson carbon residue test (see ISO 6615). This International Standard is also applicable to petroleum products which consist essentially of distillate material, and which may yield a carbon residue below 0,10 % (m/m). On such materials, a 10 % (V/V) distillation residue is prepared by the procedure described in Sections 7.1.1 & 7.1.2 of this standard before analysis. Both ash-forming constituents, as defined by ISO 6245, and non-volatile additives present in the sample add to the carbon residue value and are included in the total value reported.

Details

ICS-code 75.080
75.160.20
Nederlandse titel Aardolieproducten - Bepaling van het koolstofresidu - Micromethode
Engelse titel Petroleum products - Determination of carbon residue - Micro method
Vervangt
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen