Norm

NEN-EN-ISO 10619-2:2018 en

Rubber- en kunststofslangen - Bepaling van de weerstand tegen ozon onder dynamische omstandigheden - Deel 2: Buigproeven bij temperaturen onder de omgevingstemperatuur

52,53 63,56 Incl BTW

Over deze norm

Status Definitief
Aantal pagina's 10
Commissie Slangen en compensatoren
Gepubliceerd op 01-02-2018
Taal Engels
NEN-EN-ISO 10619-2 specifies two methods for measuring the stiffness and one method for the determination of the flexibility of rubber and plastics hoses and tubing when they are bent to a specific radius at subambient temperatures. Method A is suitable for non-collapsible rubber and plastics hoses and tubing with a bore of up to and including 25 mm. This method provides a means of measuring the stiffness of the hose or tubing when the temperature is reduced from a standard laboratory temperature. Method B is suitable for rubber and plastics hoses and tubing with a bore of up to 100 mm and provides a means of assessing the flexibility of the hose or tubing when bent around a mandrel at a specified subambient temperature. It can also be used as a routine quality control test. Method C is suitable for rubber and plastics hoses and tubing with a bore of 100 mm and greater. This method provides a means of measuring the stiffness of the hose and tubing at sub-ambient temperatures. This method is only suitable for hoses and tubing which are non-collapsible.

Details

ICS-code 23.040.70
Nederlandse titel Rubber- en kunststofslangen - Bepaling van de weerstand tegen ozon onder dynamische omstandigheden - Deel 2: Buigproeven bij temperaturen onder de omgevingstemperatuur
Engelse titel Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen