Over deze norm
This part of ISO 10846 specifies a driving point method for de termining the low-frequency transfer stiffness for translation s of resilient supports, under specified preload. The method c oncerns the laboratory measurement of vibrations and forces on the input side with the output side blocked, and is called "d riving point method". The method is applicable to test element s with parallel flanges (see Figure 1). Resilient elements, wh ich are the subject of this part of ISO 10846, are those, which are used to reduce a) the transmission of vibration in the l ower part of the audible frequency range (typically 20 Hz;20 0 Hz) to a structure which may, for example, radiate unwanted fluid-borne sound (airborne, waterborne or others); b) the tra nsmission of low-frequency vibration (typically 1 Hz to 80 Hz) which may, for example, act upon human subjects or cause dama ge to structures of any size when vibration is too severe. Measurements for translations normal and transverse to the flanges are covered in this part of ISO 10846. The method covers the frequency range from f1 = 1 Hz to the upper limiting frequency ful. Typically 50 Hz < ful < 200 Hz.
|Engelse titel||Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion|