Norm

NEN-EN-ISO 11148-6:2008 Ontw. en

Handgereedschap met niet-elektrische aandrijving - Veiligheidseisen - Deel 6: Montagegereedschap voor bevestigingsmiddelen met schroefdraad

  • Deze norm is ingetrokken sinds 07-01-2013

38,91

Over deze norm

Status Ingetrokken
Aantal pagina's 40
Commissie Gereedschappen
Gepubliceerd op 01-07-2008
Taal Engels
This International Standard applies to hand-held non-electric power tools driven by rotary or linear motors, powered by compressed air, hydraulic fluid or internal combustion engines and intended to be used by one operator and supported by: - the operator's hand or hands or a suspension, e. g. a balancer. - hand-held tools which are intended to be capable of being fixtured. Compliance with this standard on its own does not imply that power tools are suitable for use in potentially explosive atmospheres, for which additional safety measures are likely to be required. This part, applies to hand-held, non-electric, power tools for tightening or installing of threaded fasteners. This part lists the significant hazards caused by such power tools and specifies safety requirements valid for different aspects of safety during their foreseeable lifetime. Power tools covered by this part of the standard: - air-hydraulic impulse wrenches - impact wrenches - fastener installation tools - nut runners - open-ended spanners - ratchet wrenches - screwdrivers

Details

ICS-code 25.140.01
25.140.10
25.140.99
Nederlandse titel Handgereedschap met niet-elektrische aandrijving - Veiligheidseisen - Deel 6: Montagegereedschap voor bevestigingsmiddelen met schroefdraad
Engelse titel Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners
Vervangen door
Normatieve verwijzingen
  • 2006/42/EG, Machines

Winkelwagen

Subtotaal:

Ga naar winkelwagen