Norm

NEN-EN-ISO 12100:2009 Ontw. en

Veiligheid van machines - Basisbegrippen voor ontwerp, risicobeoordeling en risicoreductie

  • Deze norm is ingetrokken sinds 16-11-2010

51,12

Over deze norm

Status Ingetrokken
Aantal pagina's 81
Commissie Machineveiligheid
Gepubliceerd op 01-04-2009
Taal Engels
This International Standard defines the basic terminology and specifies the methodology and principles for risk assessment and risk reduction to help designers in achieving safety in the design of machinery. These principles reflect the knowledge and experience of the design, use, incidents, accidents, and risks associated with machinery, and provide the basis for assessing and for the removal of hazards or the reduction of risks during the relevant phases of the life cycle of machinery. This International Standard is also intended to be used as a basis for the preparation of type-B or type-C standards. The provisions stated in this International Standard are intended for the designer. This International Standard does not deal with risk and/or damage to domestic animals, property or the environment. This International Standard gives guidance on the information required to allow risk assessment to be carried out. Procedures are described for identifying hazards and estimating and evaluating risk. This International Standard provides guidance for decisions to be made on the safety of machinery and guidance on the type of documentation required to verify the risk assessment and risk reduction carried out.

Details

ICS-code 01.040.13
13.110
13.110-01
Nederlandse titel Veiligheid van machines - Basisbegrippen voor ontwerp, risicobeoordeling en risicoreductie
Engelse titel Safety of machinery - General principles for design, risk assessment and risk reduction
Vervangt
Vervangen door
Normatieve verwijzingen
  • 2006/42/EG, Machines

Winkelwagen

Subtotaal:

Ga naar winkelwagen