Norm

NEN-EN-ISO 13000-1:2005 en

Kunststoffen - Halffabrikaten van polytetrafluoretheen (PTFE) - Deel 1: Eisen en aanduidingen

48,19

Over deze norm

Status Definitief
Aantal pagina's 11
Commissie Kunststoffen
Gepubliceerd op 01-12-2005
Taal Engels
This part of ISO 13000 specifies the requirements for processed unfilled polytetrafluoroethylene (PTFE) products, which may occur in several forms. The PTFE used to make the semi-finished product is described in ISO 12086-1 and, as provided in ISO 12086-1, may contain up to 1 % of a comonomer. The PTFE used to make the semi-finished product may be virgin, reprocessed or recycled resin. The addition of up to 1,5 % by mass of pigment or colorant is permitted. This part of ISO 13000 allows for four grades based on tensile strength and elongation at break. The semi-finished products can be as-processed (type P) or dimensionally stabilized (type S) and may also have specified electrical properties or other properties when they are required for an application.

Details

ICS-code 83.140.01
Nederlandse titel Kunststoffen - Halffabrikaten van polytetrafluoretheen (PTFE) - Deel 1: Eisen en aanduidingen
Engelse titel Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen