Norm

NEN-EN-ISO 13624-1:2007 Ontw. en

Aardolie- en aardgasindustrie - Boor en productiemateriaal - Deel 1: Ontwerp en bediening van maritieme boorstijgmateriaal

  • Deze norm is ingetrokken sinds 08-12-2009

58,21

Over deze norm

Status Ingetrokken
Aantal pagina's 108
Commissie Gas- en oliewinning en -productie
Gepubliceerd op 01-05-2007
Taal Engels
The marine drilling riser is best viewed as a system. Designers, contractors, and operators should be cognizant that the individual components should be designed and selected so as to suit the overall performance of that system. For the purposes of this International Standard, a marine drilling riser system includes the tensioner system and all equipment between the top connection of the upper flex/ball joint and the bottom of wellhead conductor outer casing. It specifically excludes the diverter. Also, the applicability of this document is limited to operations with a subsea BOP stack deployed at the seafloor. Clause 1 through clause 7 of this International Standard are directly applicable to most floating drilling operations. Special situations are addressed in 8.1 and 8.4 dealing with deepwater drilling and collapse. The special considerations required for guidelineless drilling are addressed in 8.2. In addition, 8.3 and 8.5 address operations in cold weather conditions and H2S considerations. All riser primary load path components addressed in this International Standard should be consistent with the load classifications specified in ISO 13625.

Details

ICS-code 75.180.10
Nederlandse titel Aardolie- en aardgasindustrie - Boor en productiemateriaal - Deel 1: Ontwerp en bediening van maritieme boorstijgmateriaal
Engelse titel Petroleum and natural gas industries - Drilling and production equipment - Part 1: Design and operation of marine drilling riser equipment
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen