NEN-EN-ISO 13851:2019 en

Veiligheid van machines - Tweehandenbediening - Functionele aspecten en ontwerpprincipes

118,48 129,14 Incl BTW

Over deze norm

Status Definitief
Aantal pagina's 21
Commissie Machineveiligheid
Gepubliceerd op 01-05-2019
Taal Engels
NEN-EN-ISO 13851 specifies the safety requirements of a two-hand control device (THCD) and the dependency of the output signal from the actuation by hand of the control actuating devices. This document describes the main characteristics of THCDs for the achievement of safety and sets out combinations of functional characteristics for three types. It does not apply to devices intended to be used as enabling devices, as hold-to-run devices or as special control devices. This document does not specify with which machines THCDs shall be used. It also does not specify which types of two-hand-control device shall be used for a specific application. Moreover, while guidance is given, it does not specify the required distance between the THCD and the danger zone (see 8.8). This document provides requirements for design and guidance on the selection (based on a risk assessment) of THCDs including the prevention of defeat, the avoidance of faults and verification of compliance. This document applies to all THCDs, independent of the energy used, including: - THCDs which are fully assembled for installation; - THCDs which are assembled by the machine manufacturer or integrator. This document is not applicable to THCDs manufactured before the date of its publication.


ICS-code 13.110
Nederlandse titel Veiligheid van machines - Tweehandenbediening - Functionele aspecten en ontwerpprincipes
Engelse titel Safety of machinery - Two-hand control devices - Principles for design and selection



Ga naar winkelwagen