Norm

NEN-EN-ISO 14122-4:2005 en

Veiligheid van machines - Permanente toegangsmiddelen tot machines - Deel 4: Vaste ladders

  • Deze norm is ingetrokken sinds 08-08-2016

114,67

Over deze norm

Status Ingetrokken
Aantal pagina's 34
Commissie Machineveiligheid
Gepubliceerd op 01-01-2005
Taal Engels
This standard applies to all machinery (stationary and mobile) where fixed means of access are necessary. The purpose of this standard is to define the general requirements for safe access to machines mentioned in EN ISO 12100-2. EN ISO 14122-1 gives advice about the correct choice of access means when the necessary access to the machine is not possible directly from the ground level or from a floor. This standard applies to fixed ladders, which are a part of a machine. This standard may also be applied to fixed ladders to that part of the building where the machine is installed, providing the main function of that part of the building is to provide a means of access to the machine. the possible relevant national or other regulations should be taken into account. This standard applies also to ladders which are not permanently fixed to the machine and which may be removed, moved to the side or pivoted (swivel-mounted) for some operations of the machine (e. g. changing tools in a large press). For the significant hazards covered by this standard, see Clause 4 of EN ISO 14122-1.

Details

ICS-code 13.110
Nederlandse titel Veiligheid van machines - Permanente toegangsmiddelen tot machines - Deel 4: Vaste ladders
Engelse titel Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders
Vervangt
Vervangen door
Gewijzigd door
Normatieve verwijzingen
  • 2006/42/EG, Machines

Winkelwagen

Subtotaal:

Ga naar winkelwagen