Norm

NEN-EN-ISO 14171:2008 Ontw. en

Lastoevoegmaterialen - Vaste draadelektroden, gevulde draadelektroden en elekrtode-poeder-combinaties voor het onderpoederlassen van ongelegeerde en fijnkorrelige staalsoorten - Indeling

  • Deze norm is ingetrokken sinds 18-10-2010

25,62

Over deze norm

Status Ingetrokken
Aantal pagina's 23
Commissie Lassen en verwante processen
Gepubliceerd op 01-11-2008
Taal Engels
This International Standard specifies requirements for the classification of electrode/flux combinations and weld metal in the as-welded condition and in the post weld heat-treated condition for submerged arc welding of non alloy and fine grain steels with a minimum yield strength of up to 500 MPa or a minimum tensile strength of up to 570 MPa. One flux may be classified with different solid wire electrodes and tubular cored electrodes. The solid wire electrode is also classified separately based on chemical composition. This document constitutes a combined specification providing classification utilizing a system based upon the yield strength and the average impact energy for weld metal of 47 J, or utilizing a system based upon the tensile strength and the average impact energy for weld metal of 27 J. 1) Paragraphs and tables which carry the suffix letter "A" are applicable only to electrode/flux combinations and wire electrodes classified using the system based upon the yield strength and the average impact energy for weld metal of 47 J , in accordance with this International Standard. 2) Paragraphs and tables which carry the suffix letter "B" are applicable only to electrode/flux combinations and wire electrodes classified using the system based upon the tensile strength and the average impact energy for weld metal of 27 J, in accordance with this International Standard. 3) Paragraphs and tables which have neither the suffix letter "A" nor the suffix letter "B" are applicable to all electrode/flux combinations and wire electrodes classified in accordance with this International Standard. Fluxes for the single-run and two-run techniques are classified on the basis of the two-run technique.

Details

ICS-code 25.160.20
Nederlandse titel Lastoevoegmaterialen - Vaste draadelektroden, gevulde draadelektroden en elekrtode-poeder-combinaties voor het onderpoederlassen van ongelegeerde en fijnkorrelige staalsoorten - Indeling
Engelse titel Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels - Classification
Vervangt
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen