Norm

NEN-EN-ISO 14918:1996 Ontw. en

Thermisch spuiten - Het kwalificeren van thermische-spuiters

  • Deze norm is ingetrokken sinds 01-10-1998
  • Deze norm is niet direct leverbaar vanuit de NEN-shop.
    Wilt u dit product bestellen neemt u dan contact op met NEN-klantenservice: (015) 2 690 391 of klantenservice@nen.nl

Over deze norm

Status Ingetrokken
Aantal pagina's 22
Commissie Metallieke deklagen
Gepubliceerd op 01-02-1996
Taal Engels
This standard gives procedural instructions for approval testing of thermal sprayers. It defines essential requirements, ranges of approval, test conditions, acceptance requirements and certification for approval testing of thermal spray performance. During the approval test thermal sprayer shall be required to show adequate practical experience and job knowledge of thermal spraying processes, materials and safety requirements for which he is to be approved; information on these aspects is given in annex A. This standard shall be used when the thermal sprayer's approval is required by the standard, the purchaser, by inspection authorities or by other organisations. The thermal spraying processes referred to in this standard include those spraying processes which are designated as manual or mechanized. Due to the variety and specialisation of automatic systems for thermal spraying where the sprayer has no direct influence on the spraying process, this standard is not applicable in those circumstances. The certificate of approval testing is issued under the sole responsibility of the examiner or test body.

Details

ICS-code 25.220.20
Nederlandse titel Thermisch spuiten - Het kwalificeren van thermische-spuiters
Engelse titel Thermal spraying - Approval testing of thermal sprayers
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen