Norm

NEN-EN-ISO 15187:2002 en

Industriële robots - Grafische gebruikersinterfaces voor het programmeren en bedienen van robots (GUI-R)

98,05

Over deze norm

Status Definitief
Aantal pagina's 22
Commissie Informatie-integratie en interoperabiliteit
Gepubliceerd op 01-10-2002
Taal Engels
This International Standard specifies the structure and the elements of a graphical user interface for programming and operation of robots (GUI-R). Figure 3 shows the relation to the robot system, to the programming and simulation system, and to the program editor.It is important that a graphic programming system can be used both off-line, working in a separate programming station, and on-line, working in direct connection with a robot system. The same kind of graphical user interface for off-line systems might then be used in combination with any existing robot and any existing textual language. The produced code might be stored on disk or other media for downloading to a robot system, or downloading directly, e.g. via a serial link. An on-line system might be connected to a robot system via a high speed serial link or might be fully integrated into the robot control system.The content of this International Standard is focused on GUI-R for programming. The robot program itself, and its representation are thus beyond the scope of this Internationl Standard.GUI-R for operation will be covered in a future edition of this International Standard.

Details

ICS-code 25.040.30
Nederlandse titel Industriële robots - Grafische gebruikersinterfaces voor het programmeren en bedienen van robots (GUI-R)
Engelse titel Manipulating industrial robots - Graphical user interfaces for programming and operation of robots (GUI-R)
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen