Norm

NEN-EN-ISO 15494:2013 Ontw. en

Kunststofleidingsystemen voor industriƫle toepassingen - Polybuteen (PB), polyetheen (PE) en polypropeen (PP) - Specificaties voor onderdelen en leidingsystemen - Metrische reeks

  • Deze norm is ingetrokken sinds 13-11-2015

58,21

Over deze norm

Status Ingetrokken
Aantal pagina's 112
Commissie Kunststofleidingsystemen
Gepubliceerd op 01-04-2013
Taal Engels
This International Standard specifies the characteristics and requirements for components such as pipes, fittings and valves made from one of the following materials: - polybutene (PB); - polyethylene (PE); - polyethylene of raised temperature resistance (PE-RT) - crosslinked polyethylene (PE-X); - polypropylene (PP); intended to be used for thermoplastics piping systems in the field of industrial applications above and below ground. This standard is applicable to either PB, PE, PE-RT, PE-X or PP pipes, fittings, valves and their joints and to joints with components of other plastics and non-plastics materials, depending on their suitability, intended to be used for the conveyance of liquid and gaseous fluids as well as of solid matters in fluids for industrial applications such as: - chemical plants; - industrial sewerage engineering; - power engineering (cooling and general purpose water); ? mining; - electroplating and pickling plants; - semiconductor industry; - agricultural production plants; - fire fighting; - water treatment; Other application areas are permitted if the requirements of this standard and/or applicable national requirements are fulfilled. Relevant regulations in respect of fire behaviour and explosion risk are applicable if applications are envisaged for inflammable media. The components have to withstand the mechanical, thermal and chemical demands to be expected and have to be resistant to the fluids to be conveyed. Characteristics and requirements which are applicable for all materials (PB, PE, PE-RT, PE-X, or PP) are covered by the relevant clauses of this standard. Those characteristics and requirements which are depending on the material are given for each material in the relevant normative annex (see Table 1).

Details

ICS-code 23.040.01
Nederlandse titel Kunststofleidingsystemen voor industriƫle toepassingen - Polybuteen (PB), polyetheen (PE) en polypropeen (PP) - Specificaties voor onderdelen en leidingsystemen - Metrische reeks
Engelse titel Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE) and polypropylene (PP) - Specifications for components and the system - Metric series
Vervangt
Vervangen door
Normatieve verwijzingen
  • 97/23/EG, Drukapparatuur (PED)

Winkelwagen

Subtotaal:

Ga naar winkelwagen