Norm

NEN-EN-ISO 15614-5:2004 en

Beschrijven en goedkeuren van lasmethoden voor metalen - Lasmethodebeproeving - Deel 5: Booglassen van titanium, zirkoon en hun legeringen

98,05

Over deze norm

Status Definitief
Aantal pagina's 26
Commissie Lassen en verwante processen
Gepubliceerd op 01-04-2004
Taal Engels
This standard is part of a series of standards, details of this series are given in prEN ISO 15607:2000, annex A. This standard specifies how a preliminary welding procedure specification is qualified by welding procedure tests. This standard defines the conditions for the execution of welding procedure tests and the range of qualification for welding procedures for all practical welding operations within the range of variables listed in clause 8. Tests shall be carried out in accordance with this standard. Additional tests may be required by application standards. This standard applies to the arc welding of titanium, zirconium and their alloys in all product forms. Arc welding is covered by the following processes in accordance with EN ISO 4063. 131;metal inert gas welding, MIG welding 141;tungsten inert gas welding, TIG welding 15 - plasma arc welding The principles of this standard may be applied to other fusion welding processes.

Details

ICS-code 25.160.10
Nederlandse titel Beschrijven en goedkeuren van lasmethoden voor metalen - Lasmethodebeproeving - Deel 5: Booglassen van titanium, zirkoon en hun legeringen
Engelse titel Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys
Vervangt
Normatieve verwijzingen
  • 2014/68/EU,
  • 97/23/EG, Drukapparatuur (PED)

Winkelwagen

Subtotaal:

Ga naar winkelwagen