Norm

NEN-EN-ISO 15614-6:2003 Ontw. en

Beschrijven en goedkeuren van lasmethoden voor metalen - Lasmethodebeproeving - Deel 6: Booglassen van koper en zijn legeringen

  • Deze norm is ingetrokken sinds 25-05-2006

31,83

Over deze norm

Status Ingetrokken
Aantal pagina's 27
Commissie Lassen en verwante processen
Gepubliceerd op 01-11-2003
Taal Engels
This standard is part of a series of standards. Details of this series are given in EN ISO 15607, Annex A. This standard specifies how a welding procedure specification is qualified by welding procedure tests. This standard defines the conditions for the execution of welding procedure tests and the range of qualification for welding procedures for all practical welding operations within the range of variables listed in clause 8. Tests shall be carried out in accordance with this standard. Additional tests may be required by application standards. This standard applies to the arc welding of copper and copper alloys in all product forms. Arc and gas welding are covered by the following processes in accordance with EN ISO 4063: 111 manual metal arc welding; 131 metal inert gas welding, MIG welding; 141 tungsten inert gas welding, TIG welding; 15 plasma arc welding; 311 gas welding. The principles of this standard may be applied to other fusion welding processes.

Details

ICS-code 25.160.10
Nederlandse titel Beschrijven en goedkeuren van lasmethoden voor metalen - Lasmethodebeproeving - Deel 6: Booglassen van koper en zijn legeringen
Engelse titel Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc welding of copper and its alloys
Vervangen door
Normatieve verwijzingen
  • 2014/68/EU,
  • 97/23/EG, Drukapparatuur (PED)

Winkelwagen

Subtotaal:

Ga naar winkelwagen