Norm

NEN-EN-ISO 15618-2:2002 en

Het kwalificeren van lassers voor onderwaterlassen - Deel 2: Duiker-lassers en bedieners van lasapparatuur voor hyperbaar drooglassen

98,05

Over deze norm

Status Definitief
Aantal pagina's 22
Commissie Lassen en verwante processen
Gepubliceerd op 01-02-2002
Taal Engels
This standard applies to welding processes where the skill of the diver-welder or welding operator has a significant influence on weld quality. This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements and certification for the approval testing of diver-welder or welding operator performance for the welding of steels underwater in a hyperbaric dry environment. The recommended format for the certificate of approval testing is given in Annex A. During the approval test the diver-welder or welding operator should be required to show adequate practical experience and job knowledge (test non mandatory) of the welding processes, materials and safety requirements for which he is to be approved, information on these aspects is given in Annex B. This standard is applicable when the diver-welder s or welding operator s approval testing is required by the purchaser, by inspection authorities or by other organisations. The welding processes referred to in this standard include fusion welding processes which are designated as manual or partly mechanized welding for diver-welders and fully mechanized or automatic welding for operators (see 5.2). All new approvals are in accordance with this standard from the date of this issue.

Details

ICS-code 25.160.01
Nederlandse titel Het kwalificeren van lassers voor onderwaterlassen - Deel 2: Duiker-lassers en bedieners van lasapparatuur voor hyperbaar drooglassen
Engelse titel Qualification testing of welders for underwater welding - Part 2: Diver-welders and welding operators for hyperbaric dry welding
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen