Norm

NEN-EN-ISO 16276-1:2005 Ontw. en

Bescherming van staalconstructies tegen corrosie door middel van verfsystemen - Beoordeling van, en acceptatiecriteria voor, de adhesie/cohesie (breuksterkte) van een droge laag - Deel 1: Lostrekbeproeving

  • Deze norm is ingetrokken sinds 23-05-2007

25,62

Over deze norm

Status Ingetrokken
Aantal pagina's 14
Gepubliceerd op 01-02-2005
Taal Engels
This document specifies procedures for assessing the fracture strength of a protective paint system of any thickness on a steel substrate with a thickness not less than 10 mm. The procedures given in this standard are based on test methods for different types of pull-off test equipment. The results obtained using different types of test equipment shall not be compared. NOTE 1 If the thickness of the substrate is less than 10 mm it needs to be strengthened (e.g. sandwich technique) in order avoid bending. Otherwise part 2 of this standard shall be used or test panels with a thickness of at least 10 mm shall be coated in parallel. This standard does not give any values for fracture strength for different protective paint systems. This standard is only applicable if a value for fracture strength, a test method and an apparatus manufacturer are all specified. This document specifies the use of appropriate equipment and defines inspection areas, sampling plans and acceptance/rejection criteria.

Details

ICS-code 87.020
Nederlandse titel Bescherming van staalconstructies tegen corrosie door middel van verfsystemen - Beoordeling van, en acceptatiecriteria voor, de adhesie/cohesie (breuksterkte) van een droge laag - Deel 1: Lostrekbeproeving
Engelse titel Corrosion protection of steel structures by protective paints systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a dry film - Part 1: Pull-off testing
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen