NEN-EN-ISO 16852:2010 en

Vlamdovers - Prestatie-eisen, beproevingsmethoden en begrenzingen bij gebruik


Over deze norm

Status Definitief
Aantal pagina's 49
Commissie Ontplofbare atmosferen
Gepubliceerd op 01-05-2010
Taal Engels
This International Standard specifies the requirements for flame arresters that prevent flame transmission when explosive gas-air or vapour-air mixtures are present. It establishes uniform principles for the classification, basic construction and information for use, including the marking of flame arresters, and specifies test methods to verify the safety requirements and determine safe limits of use. This International Standard is valid for pressures ranging from 80 kPa to 160 kPa and temperatures ranging from 20 °C to 150 °C. This International Standard is not applicable to the following: - external safety-related measurement and control equipment that might be required to keep the operational conditions within the established safe limits; - flame arresters used for explosive mixtures of vapours and gases, which tend to self-decompose (e.g. acetylene) or which are chemically unstable; - flame arresters used for carbon disulphide, due to its special properties; - flame arresters whose intended use is for mixtures other than gas-air or vapour-air mixtures (e.g. higher oxygen-nitrogen ratio, chlorine as oxidant, etc.); - flame arrester test procedures for internal-combustion compression ignition engines; - fast acting valves, extinguishing systems and other explosion isolating systems; - flame arresters integrated or combined with explosion-protected equipment, such as blowers, fans, compressors and pumps.


ICS-code 13.220.10
Nederlandse titel Vlamdovers - Prestatie-eisen, beproevingsmethoden en begrenzingen bij gebruik
Engelse titel Flame arresters - Performance requirements, test methods and limits for use
Normatieve verwijzingen
  • 2014/34/EU,
  • 94/009/EEG, Ontploffingsgevaar en apparaten (ATEX)



Ga naar winkelwagen