Norm

NEN-EN-ISO 16911-1:2011 Ontw. en

Emissies van stationaire bronnen - Bepaling van de stroomsnelheid en het debiet in afgaskanalen - Deel 1: Handmatige referentiemethode

  • Deze norm is ingetrokken sinds 18-03-2013

51,12

Over deze norm

Status Ingetrokken
Aantal pagina's 74
Commissie Emissiemetingen en algemene aspecten
Gepubliceerd op 01-11-2011
Taal Engels
The standard which describes a method for periodic determination of the axial velocity and volumetric flow of gas within emissions ducts and stacks is applicable for use in circular or rectangular ducts with measurement locations meeting the requirements of EN 15259. Minimum and maximum duct sizes are driven by practical considerations of the measurement devices described within this standard. This standard requires all flow measurements to have demonstrable metrological traceability to national or international primary standards. To be used as a Standard Reference Method, the user shall demonstrate that the performance characteristics of the method are equal to or better than the performance criteria defined in this International Standard and that the overall uncertainty of the method, expressed with a level of confidence of 95 %, is determined and reported. Typically this standard can achieve measurements with an uncertainty of 5 % at flow velocities of 20 m? s?1 . Alternative methods to this method may be used provided that the user can demonstrate equivalence, based on the principles of Technical Specification CEN/TS 14793

Details

ICS-code 13.040.40
Nederlandse titel Emissies van stationaire bronnen - Bepaling van de stroomsnelheid en het debiet in afgaskanalen - Deel 1: Handmatige referentiemethode
Engelse titel Stationary source emissions - Determination of velocity and volume flow rate in ducts - Part 1: Manual reference method
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen