Norm

NEN-EN-ISO 16911-2:2011 Ontw. en

Emissies van stationaire bronnen - Bepaling van de stroomsnelheid en het debiet in afgaskanalen - Deel 2: Geautomatiseerde meetsystemen

  • Deze norm is ingetrokken sinds 18-03-2013

38,91

Over deze norm

Status Ingetrokken
Aantal pagina's 45
Commissie Emissiemetingen en algemene aspecten
Gepubliceerd op 01-11-2011
Taal Engels
This Part of EN ISO 16911 describes specific requirements for AMS flow monitoring. It is partly derived from EN 14181 which is the general document on the quality assurance of AMS and is applicable in conjunction with that document. This part of EN ISO 16911 specifies conditions and criteria for the choice, mounting, commissioning and calibration of automated measuring systems (AMS) used for determining the volumetric flow rate from a source in ducted gaseous streams. This part of EN ISO 16911 is applicable by correlation with the manual reference method described in this standard part 1, EN ISO 16911-1. This part of EN ISO 16911 is primarily developed for monitoring emissions from waste incinerators and large combustion plants. From a technical point of view, it may be applied to other processes, for which flow rate measurement is required with defined and minimised uncertainty.

Details

ICS-code 13.040.40
Nederlandse titel Emissies van stationaire bronnen - Bepaling van de stroomsnelheid en het debiet in afgaskanalen - Deel 2: Geautomatiseerde meetsystemen
Engelse titel Stationary source emissions - Determination of velocity and volume flow rate in ducts - Part 2: Automated measuring systems
Vervangen door
Normatieve verwijzingen
  • 2001/80/EG,

Winkelwagen

Subtotaal:

Ga naar winkelwagen